EVENTS / SHOWS
EVENTS / SHOWS
ROAD WORKS
ROAD WORKS
CONSTRUCTION SITES
CONSTRUCTION SITES
CIVIL PROTECTION
CIVIL PROTECTION

Hydropowercube 8.5

Lighting for Large Public Events and Construction Projects

Lighting for Large Public Events and Construction Projects
The Hydropowercube has a vertical telescopic mast reaching a maximum height of 8.5 metres and the complete unit is secured via four, adjustable, stabilisers. The mast is hydraulically raised by a single lever and can be rotated through 340° ensuring that the light is targeted correctly.

Illumination is provided from four 1000w metal halide lamps and the power is generated by a super-silent 1500-rpm water-cooled diesel engine. There is a useful 9.0kVA of auxiliary power and the Hydropowercube has been safely wind tested up 80 Km/h. Four corner-lifting eyes have been included for swift dispatch and unloading.

The extra large 200-litre fuel tank means that the site will stay correctly illuminated for up to 32 hours without the need for refuelling.

The Hydropower cube is the perfect set when static, long running lighting, is needed on large construction projects and outside events.

Click here to download brochure
  1. Features & Benefits
  2. Illuminated areas
  3. Dimensions
  • 9.0kVA of auxiliary power
  • Wind tested up 80 Km/h.
  • Four corner-lifting eyes for swift dispatch and unloading.
  • Compact closed dimensions of just 1330 x 1225 x 2330mm and weighing only 1180kg - an operator can deliver up to twenty Hydropowercubes on one single truck.
  • Extra large 200-litre fuel tank - means that the area will stay correctly illuminated for up to 100 hours without the need for refuelling.


The Hydropower cube is the perfect set when static, long running lighting, is needed on large construction projects and outside events

Lighting footprint calculation
Hydropowercube 4x1000w metal halide
Area 4000 Mq - 20 Lux average
Superlight VT1 footprint chart

Lighting foot print Lux levels

Lux level 5
Lux level 20
Lux level 50
Lux level 100
Lux level 200

Hydropowercube
4x1000w metal halide - 4000 Mq

Activity Typical types of construction* Minimum
Brightness
in lux
Movement of people, machines and vehicles (a) Driving, general pedestrian movement, unloading equipment or supplies. 5
Movement of people, machines and vehicles in hazardous areas;
rough work not requiring any perception of detail		 Less detailed carpentry, concrete pouring. 20
Work requiring limited perception of detail (b) Brick laying, carpet laying, slab levelling, drain laying, roofing, scaffolding. 50
Work requiring perception of detail (b) Electrical work, fine detail carpentry, plumbing, surveying, tiling. 100
Work requiring perception of fine detail (b) Viewing site plans, fine detail electrical work, fine finishing of plastering. 200
  • Only safety has been considered, because no perception of detail is needed and visual fatigue is unlikely.
    However, where it is necessary to see detail to recognise a hazard or where error in performing the task could put someone else at risk, for safety purposes as well as to avoid visual fatigue, the figure needs to be increased to that for work requiring the perception of detail.
    The CIBSE (Code for interior lighting) gives more information and recommendation based on scientific knowledge, practical experience, technical feasibility and economic reality.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.
  • The purpose is to avoid fatigue; the illuminances will be adequate for safety purposes.

Model: Hydropowercube

Floodlights: 4x1000w metal halide

Close dimension: 1330x1225x2330 mm

Open dimension: 2542x2542x8500 mm

Weight: 1180 Kg

Hydropowercube

PROUD TO BE THE LEADERS IN LIGHTING TOWERS